Checkered plate

DESCRIPTION

DETAILS

Also known as the textured plate steel plate, is the surface of diamond or ribbed plate. The main pattern from non-slip and decorative effect. Combination of the tread plate skid resistance, bending resistance, saving the amount of metal and the appearance of the comprehensive effect, are significantly better than a single type of plate.

Uses:

Pattern plate is widely used in shipbuilding, boilers, cars, tractors, rail cars and construction and other industries. Because of its surface rib plate, non-slip effect, can be used as the floor, factory escalator, working platform pedals, ship deck, car floor and so on. Pattern plate for the workshop, large equipment or ship walkways and stair pedals, is the surface of the diamond-shaped or lenticular pressed steel plate.

Category:

Plate hot-rolled delivery state; pattern surface of the plate may not have bubbles, scarring, cracking, folding and inclusion, the steel can not be stratified. Surface quality is divided into two levels:

Ordinary accuracy: The surface of the steel sheet is allowed to have a thin layer of scale, rust, surface roughness due to the scale off, and other local defects whose height or depth exceeds the allowable deviation. Pattern is allowed on the obvious burr and no more than the height of the individual marks. The maximum area of a single defect does not exceed the square of the grain length. The company is located in:

Higher accuracy: a thin layer of scale on the steel surface, rust and other local defects of height or depth not to exceed half the thickness tolerance.

The pattern is intact and the pattern allows for a slight, localized burr of height that does not exceed half of the thickness tolerance.

Checkered plate according to the material (aluminum, stainless steel, ordinary steel, etc.) different, different patterns, the theoretical weight per square meter is also different.

1. Steel width of 600 ~ 1800mm, according to 50mm upgrade; length of 2000 ~ 12000mm, according to 100mm upgrade.

2. Pattern pattern height not less than 0.2 times the thickness of the substrate. Figure size is not as a basis for inspection of finished products.

3. Steel plate grades by GB / T700, GB / T712, GB / T4171 regulations.

4. Steel mechanical properties are not guaranteed, when the demand side has required, according to the relevant standards, may also be agreed by both parties.

5. Steel plate is delivered as hot rolled.

The surface of the plate with the pattern known as the tread plate, the English name: diamond plate. Its pattern into a lentil-shaped, diamond-shaped, round bean-shaped, oblate mixed shape, the most common market to lentils. Origin: Laiwu Steel, Rizhao, Benxi Iron and Steel, Shougang, Nanjing Steel, Mei Steel, Anshan Iron and Steel, TISCO, North Taiwan and so on.