Galvanized round bar

Material grade

10 #, 20 #, 35 #, 45 #, Q215, Q235, 304, 316, 20Cr, 40Cr, 20CrMo, 35CrMo, 42CrMo, 40CrNiMo, GCr15, 65Mn, 50Mn, 50Cr, 3Cr2W8V, 20CrMnTi, 5CrMnMo

Product ingredients

Chemical composition: C 0.42-0.50 Si 0.17-0.37 Mn 0.50-0.80 Cr Not more than 0.25 Ni Not more than 0.30 Cu Not more than 0.25 Mechanical properties: Tensile strength of not less than 600Mpa, yield strength of not less than 355Mpa, elongation of not less than 16, the cross section Shrinkage of not less than 40%, impact power not less than 31J. Not hot under HBS10 / 3000 not more than 229. Recommended heat treatment temperature: normalized 850 degrees Celsius. Quench 840 degrees Celsius, tempering 600 degrees Celsius.

Application range

The application of round steel has broad prospects. It is widely used in hardware, construction, automobile, shipbuilding, petrochemical, machinery, medicine, food, electricity, energy, aerospace, construction and decoration. The most common parts of ordinary machinery processing, the general rod steel, CD rod, bolts, nuts.

Product advantages

The difference between round bars and other bars:

1, the appearance is not the same, round shape round, non-textured ribbed, the other surface of the steel profile or ribbed.This will result in a small bar and concrete bond strength, and other steel and concrete Strong bond.

2, the composition is not the same, round steel (a steel) are ordinary mild steel, mostly steel and other steel.

3, the strength is not the same. Low strength round steel, high strength of other steels, that is the same diameter of the round bar Compared with other bars, round bar can withstand the pull less than other bars, but round plasticity than other bars Strong, that is, the round bar is pulled off before the larger deformation, while the other before being pulled off the deformation is much smaller.